Posts Tagged ‘Wooden’

• Officially licensed MTA series New York City Subway cars
• Broadway Local
• Compatible with Thomas, Brio, and Plan City track sets
• Ages 3 years +

Product Description
Officially licensed MTA series New York City Subway cars. The 1 train is a classic IRT Local which runs from Van Cortlandt Park in the Bronx through Manhattan along Broadway to South Ferry station in Manhattan. Compatible with Thomas, Brio, and Plan City track sets…. More >>

Munipals NYC Subway 1 Car Toy Train Wooden Railway Compatible

Technorati Tags: Compatible, Munipals, railway, subway, train, Wooden

Boys will be boys as a famous saying goes. No matter what generation you belong you, you will always find similarities with the toys played by each. Take example toy trains, there are so many toy trains available and the kids love almost each kind. There are wooden trains, electric trains and many more. For some, they play with trains wherever they feel like it. There are those that put effort on where to play it even putting train tracks in their room.

Maintaining these toy trains depend on what their material. However, just wiping them with a clean towel to remove dust is enough. Also, try to keep the trains in a safe place so that they will have a longer lifespan. In addition, it is nice to pass such treasured possessions to the next generations knowing that this is already an antique item. Not everyone is able to get antique pieces as their heirloom because some individuals just do not care whether the item breaks down or not. For them, as long as they enjoy playing with it, that is enough.

Wooden trains are perhaps the easiest to do because there is plenty of wood. Just use your imagination and you will be able to make your own version of a train from wood. Putting on some varnish or paint can change the look of the train you made. You can even personalize the toy by adding up some accessories or designs to make it come alive. The fruits of the labor are inexplicable since you are too overwhelmed with the fact that you were able to make your own toy without any help. Nevertheless, if children want to do the same, you must be by their side when they make this project.

Let the children so whatever they want but make sure that they are safe from any harm. When something needs hammering, be the one to do it for them. They might end up smashing their fingers. When this happens, not only will they get wounds but also the pain is very evident that trauma may sink it because of the incident. However, adults must also be careful when using a nail and hammer. They might also hammer their hand or finger and they too will experience excruciating pain brought by it.

Whether the kids play with wooden trains, electrical trains or whatever trains they have, safety is also of utmost importance. Though they are toys, they can still pose threats to children and adults when not handled carefully. Finding a safe place to play with it can be anywhere. Keeping the children away from harm and avoiding it is something inevitable. All you need to do is be alert, have a first aid kit within arms reach just in case anything bad happens. It is also the responsibility of the parents or guardians to make sure that the toys they give to the kids are hazard-free. Being safe goes a long way in this world.

Technorati Tags: trains, Variety, Wide, Wooden

For those just starting out in the world of Lionel trains or any other brand, and who are looking to add wooden structures to them, the first instinct might be to go out and buy pre-packaged kits. After all, why to go all the trouble and time of building wooden train structures yourself when you can just go out and buy a kit that’s been designed with that very purpose in mind?

Even though it requires more work, there are several reasons for building your own wooden train structures.

First, many hobbyists get a great deal of pleasure from the task of building wooden train structures themselves. Hobbyists have even more fun with it by participating in achievement programs and contests. For anyone participating in contests or the achievement program (or even for your Master Builders Structures Certificate) there are various guidelines that must be followed.

Second, hobbyists might not be able to get what they want from pre-packaged kits, leaving them with little choice but to build it themselves.

After making the decision to build custom wooden structures, it is time to get started. The first step is to gather the tools you will need. If you can put a craftsman kit together, this task should be simple. Most of the tools you will probably already have in your possession, items such as a scale ruler, single edge razor blades, Xacto knife (or similar), and a smallish square. Those are the absolute basics, though in the interests of making life easy for yourself it would also be a good idea to go out and invest in such items as a miter box, saw, a steel plate (preferably with a square grid) small biggies filled with side weights (for the purposes of having adjustable weights), aluminum side rails with extra magnets, little clamps, a chopper, a sander and smaller items such as pins, pencils, scissors and glass plates.

After getting the tools, the next step is to draw up (to scale) a plan for the structure. Once you have that, the wood raw materials need to be gathered. Stripwood is a good choice. Commercially available siding is acceptable as a cover.

Prior to starting the assembly comes staining or treating the wood if desired. Variations in the wood can give structures a more realistic appearance. If you want these variations, it will need to be pre-stained prior to assembly.

The final step is assembling the structure. If you want to decorate and see the interior (which is a must if the building will be in the foreground), you must be sure to make the roof removable (cover trusses with boards, then shingle; rafting and cross bracing are recommended to give it both stability and strength). Nail-holes are absolutely essential for clapboard siding. This can be achieved with straight pins for smaller structures or larger pins requiring a pounce wheel. All subassemblies should be assembled prior to attempting to connect them to the building (if you are planning to paint the building, don’t put the subassemblies on until this is done). Use clear plastic or glass for windows.

Once the wooden train structures are completed, they are sure to take your train set to the next level. They will last a lifetime and will work great with Lionel trains or any other brand you select.

Technorati Tags: Adding, Guide, lionel, Structures, train, trains, Wooden

Metal and wooden train models remain one of most beloved hobbies for many of us. It’s a way to connect with our children as well as a way to take our own trips down memory lane remembering trains toys and other childhood favorites. Anyone who’s ever known the satisfaction of seeing a completed model train assembled by his own hands knows how important the details are.

It’s the passion and desire for perfection that draws people to building and adding their own wood structures versus incorporating a pre-fabricated kit. There’s a sense of pride in knowing the tiniest details were carefully and painstakingly created by the owner. Whether you’re a seasoned train collector or are just discovering this satisfying pastime, keep reading for a few tips for successfully adding wood structures for your metal or wooden train.

Your first task is to define the project. In your mind, what does the finished project look like? Like the idea of tunnels for your train to travel through? Making your scenery interactive with the working train isn’t as difficult as you might think. You want it to blend seamlessly with the train and the tracks. Other ideas include greenery, mountains and of course, buildings.
Two options to consider include pre-fabricated kits that allow you to build your wooden structures with relative ease using the pre-cut pieces, or as many prefer, you can tackle the project “from scratch”. This method is a bit more time-consuming, but the pride of having finished a project such as this is indescribable.  

If you are considering the “from scratch” option, here are a few basic tools and materials that will help you get started:
•    Crafting knife – also referred to as a hobby knife
•    Exacto knife and blades – we suggest varying angles and curves for your blades which can be found in any hobby or craft store
•    Pencils with erasers
•    Ruler or a traditional tee square
•    Carpenter’s glue
•    Wood strips
•    Durable cardboard or press board to create templates

Remember, if you decide to build your wood structures, you’ll need to first create templates from which to cut the sheets of wood from. Using your template, carefully trace it onto your strip wood. Don’t forget windows and doors if they’re part of your plan. From there, you’ll be able to cut your wood verbatim to your template. One advantage of creating templates is the fact they’re re-useable. Using your wood or carpenter’s glue, secure the panels together to form your buildings. If you creating several buildings with the intent of using them as miniature homes, churches or other buildings, you’ll naturally want them to vary in height and width.

Once your glue has dried, tiny nails gently driven into the seams will serve as additional strength to the structures. Sandpaper smoothes out the rough edges and provides a better foundation for any paint or stains you intend to apply.

It should be noted many avid toy train collectors build their models with roof structures that can be removed to decorate the inner walls. It’s not uncommon to see houses with fireplaces drawn and chimneys extending from the wooden structures.  Again, this is your vision, your metal or wooden train and your project. Be as creative as you wish.

Your trains toys and wooden designs very well can become a part of your legacy as it’s passed down to children, grandchildren and great grandchildren.

Technorati Tags: Adding, Guide, Metal, Structures, Toys, train, wood, Wooden